Philips OccuSwitch LRM1080 is a movement detector with a built-in switch. It will switch the lights off in a room or area when it is vacated and thus save up to 30% on electricity. The OccuSwitch can switch any load of up to 6 A and control an area of between 20 and 25 m2. A detachable mains connector enables easy installation and mounting of the OccuSwitch in the ceiling. Separate Wieland cables and Ceiling Mounting Boxes are available for easy, fast and trouble-free installation.
1080 Advanced version, is the same as the LRM1070 but with parallel operation (up to 10 Occuswitch units), local override and absence mode.
Benefits • Energy savings of up to 30% and good pay-back • Works with almost all lamp- and luminaire types • Easy to install, enables even faster installation by optional Wieland connectors.
Features • OccuSwitch has a smart timer that will extend the delay time by 10 minutes if movement is detected shortly after switch-off, assuming that the area is still in use but there is very little movement • The OccuSwitch has a retractable shield that can be used to shield off areas, e.g. corridors, adjacent to the area the OccuSwitch is controlling
Application • The OccuSwitch is designed for use in offices, schools and similar applications, including toilets, storage rooms, etc • It is optimized for recessed ceiling mounting and for mounting heights between 2.5 and 4 meters • The surface box also enables surface mounting, with either recessed wiring or surface-mounted ducts
**3 WEEK LEAD-TIME**