Kosnic LED All in One Switchable 2D Sensor/Corridor Dim, K2DC9-18CRD

NEW K2DC9-18CRD: Colour temperature switchable (3000K/4000K/5000K) and wattage switchable (9W/12W/18) LED 2D lamp with built-in dusk to dawn and corridor function. Retrofit existing 4-pin 2D CFL bulkheads with a 4-Pin GR10q base.

The LED DD lamp has a built-in microwave motion sensor. The sensor can be adjusted to control the sensor’s ambient light level threshold, detection range and illumination time. The latest version includes a corridor dimming corridor function which can be set to keep the lamp on at 10% when not in use.

- 9W setting equivalent to 16W 2D CFL
- 12W setting equivalent to 28W 2D CFL
- 18W setting equivalent to 38W 2D CFL

Save energy up to 65% compared with a fluorescent DD lamp with magnetic ballast. For maximum energy savings, bypass all control gear and supply directly from the mains. Single side high lumen output for light only where it’s needed. Long life of 30,000 hr, 3 x longer than fluorescent DD lamps. Compatible with Kosnic’s standard and self-test emergency modules. Instant start, suitable for frequent switching. Negligible UV & IR radiation output. When using with magnetic ballast, simply remove the starter before installation. If HF electronic ballast is used, the ballast needs to be by-passed

Applications: Ideal utility lighting for use in communal and public areas such as stairwells & corridors.

Select emergency option at right side